Cold rooms are
made with PUF Panels with thermal insulation, corrosion-resistant and are
available in many colours to give an aesthetic look to your vicinity. When we
install cold rooms, there are high chances that the floor below the cold room
may experience condensation, and it also happens because the environment is
warm. The cold rooms can experience heavy-duty loads sometimes, leading to
long-term leaks and prevails condensation under the cold-room floor.
What causes condensation below a cold-room floor?
- Poor ventilation:
Lack of ventilation can form moisture in the air, which can contact cold
surfaces and form condensation.
- Warm Temperature:
If the temperature outside cold room is high, then there is a
possibility of condensation on the panels.
How to prevent it?
- Replace the door seal:
The most important factor is to replace the door seal, which may act as
a conducting agent between inside and outside environment. Replacing the door
seal will prevent any warm air from sweeping inside the cold room and
restricting condensation.
- Secondary barrier:
If the door is being constantly operated, the chances are high that air
could enter the environment. PVC strip curtains act as the second barrier and
prevent any air from entering.
- Cold room doors also
play an important role in maintain the balance of the cold room and
prevent any condensation.
- If the door seal is working correctly,
adjust the door strike. It may be one effective method to prevent
condensation in the cold room.
- Increase ventilation: poor
airflow can also result in condensation problem; if you face constant
condensation problems, one way is to ensure a proper ventilation system.
- Choosing a correct panel
manufacturer is also essential as high-quality panels will ensure
prevention of the condensation. Isofelx is a cold room panel manufacturer,
providing high-quality products for its customers for decades. If you want
any more information regarding panels,
you can visit the
following website:
http://isoflexsystems.in/cold-room-panels/
No comments:
Post a Comment